Skip to main content

Post in evidenza

Router table with power lift, built around Ikea BEKVÄM and parts from old drafting machine

This is my (quite) completed router table built around IKEA kitchen cart BEKVÄM and a precise drafting machine cannibalized.










Router is a Bosch POF 1200.
Router table is equipped with power lift feature (missing only router support in the photos).

CNC EMBROIDERY: 100 € tondi tondi

Per controllare questa piccola macchina ho deciso di sperimentare i nuovi prodotti embedded, in attesa di avere per le mani una scheda affidabile per linuxcnc.



Per l'interfaccia utente ho deciso di affidarmi al RASPBERRY PI. Ho visto che è stato aperto un thread su LINUXCNC per utilizzare questa scheda come hardware dedicato, ma ritengo che al momento non sia perseguibile.

Finalmente PYTHON! (http://www.python.org)

L'idea è di implementare un web server per la gui con CHERRYPY (http://www.cherrypy.org), con i tanti cavalli di python sotto il cofano. Per la gestione delle traiettorie e dei motori proverò GRBL (https://github.com/grbl/grbl), con un opportuno fork per gestire la rotazione del volantino invece dell'asse z.

Facciamo qualche conto (al 27.12.2012):
RASPBERRY PI: € 32.00
ARDUINO UNO: € 20.00
3x POSTEP25: € 48.00
TOTALE: € 100.00

Comments

  1. hello I want buy your embroidery machine project

    ReplyDelete

Post a Comment

Popular posts from this blog

PEATOL/TAIG: the most beautiful affordable metal lathe

I bought a PEATOL/TAIG because i need a small lathe (despite i have a 7x20 lathe) i can operate in my house. I have known about it from the conspicuous fans all over the world.




Here some links if you want to know more about PEATOL/TAIG:
Peatol Machine Tools: the home of PEATOL/LATHE;
Deansphotografica: beautiful projects;
CarterTools: the biggest resource i know about taig;
LeeValley Instruction booklet;

I received it from Peter of Peatol (UK) on August, and now i'm showing it once assembled the base, the motor and it's fully functional. The motor was blue so i repainted to black.
I assembled also the motor mount from aluminium with primitives dovetails. My version of lathe come with powerfeed already installed and a sturdy block of aluminium for raise the entire lathe.

This is my start package:
1015Micro lathe with power feed1030Four jaw chuck, with reversible, heat-treated steel jaws10921/16"-3/8" Jacobs chuck1150Drilling tailstock - lever operated1151Needle bearing centr…

COIN-OP: mini arcade cabinet build log

My father bought some wood panels from Ikea. He donated two to build a mini arcade cabinet for my son. The arcade cabinet will use a raspberry pi with PiMame and some Sparkfun arcade goods, like a Zippy arcade joystick and concave buttons. In this post you'll find a short build log. The cabinet is 1 meter tall (39") and 0.42 meter wide (17").

Cutting the hpl boards. Masking tape installed for marking

The monitor, a 19" sony sdm-hs95
Build log:






Monitor installation test

EMBROIDERY CNC: Software completed

The software for the cnc embroidery is finally completed and fully functional.


Screenshot: Main screen
Screenshot: Palette selection
Screenshot: Color selection
Screenshot: Artwork translate panel
Screenshot: Grbl dashboard panel (realtime via browser thanks to Websocket)
Screenshot: G-Code Inspection panel